★★★★★
“
Again, extremely challenging! Loved ALL of Master Samurai Tech!”
-
JP
★★★★★
“
The Advanced Troubleshooting Course has one problem that I am not happy with.... it has an ending. The insight and practice I received from this course are really valuable and I gained so much from the time I spent completing it.”
-
Jordan
★★★★★
“
Units were well structured and connected smoothly. It took its time to explain the more complicated issues and referred to fundamental often to reiterate key points. Nice.”
-
Brian
★★★★★
“
wow, you really made me think. getting some answers wrong sometimes made me remember those questions even more. I will do a lot of reviewing of the material.”
-
christopher waggoner
★★★★★
“
I have the mental tools I needed. Thanks!!”
-
James Stoody
★★★★★
“
Very in depth course. 5 stars!”
-
Alex Trirch
★★★★★
“
Well, I just finished and let me just say, AWESOME COURSE. This course had some very good review of several concepts and brought in new concepts too. It was then masterfully tied together in the schematic based exercises. These exercises will definitely let you know just which end is up as far as your schematic reading skills. It sure did for me. If there is any doubt in your mind about how this program stacks up against any others out there, it will be erased in short order. Well worth your time and efforts. Just make sure you are ready to put in the work and time. No regrets from me.”
-
Darren Obermeyer
★★★★★
“
Great”
-
Kyle McReynolds
★★★★★
“
Advance troubleshooting course was greate, i did enjoyed it, Thank you teem Samurai, thank you Susan for all the help.”
-
Robert Bagramian
★★★★★
“
Great course, I really learned a lot.”
-
Michael Drewry
★★★★★
“
Awesome course!”
-
Justin Keith
★★★★★
“
I would like to thank you very much for the information imparted to me. Using the knowledge obtained from your course, I will be the best technician that I can be.”
-
Steve Cabera
★★★★★
“
After completing another course with the Master I feel confident in my strengths and most important I know my weaknesses. Now I have the tools and resources to continue to work on those weaknesses and further develop my trade. Thank you!”
-
Paul Lundgren
★★★★★
“
A further explanation of electrical. This course has really helped with a further understanding of electrical theory and trouble shooting.”
-
Kyle
★★★★★
“
It was worth it!!!!!”
-
Tithus Patterson
★★★★★
“
Being a new tech, this is a must!”
-
Gmaire02
★★★★★
“
It was a challenge, but worth it.”
-
Jody Aucoin
★★★★★
“
Some of my wrong answers were not explained so I was left a little bewildered as to the right answer. Great course all in all. ***Reply from Team Samurai: The Student Forums are a perfect place for you to get an explanation for answers that you missed. Please start a topic there and we'll be happy to make sure you understand what the correct answer should be.”
-
Roger Rees
★★★★★
“
Amazing course! I am surprised at how informative and thorough this advanced course was!”
-
Luke Jones
★★★★★
“
Great stuff.”
-
Matthew Sampson
★★★★★
“
Excellent course!! Ups your game!”
-
SD40-2
★★★★★
“
Great Course”
-
Robert K
★★★★★
“
Challenging and informative. For someone just looking to get into the field. This course was fantastic. Just and FYI....Take the Fundamentals Course first, you won't by sorry that you did.”
-
Christopher Jones
★★★★★
“
When I started this course I had no previous knowledge in this field coming from a truck driver background. After the Fundamental course and this troubleshooting course I am confident I can diagnose and repair any appliance!! The troubleshooting course took me to another level! Highly recommended Thanks so much to Mr. and Mrs. Samurai”
-
Rob Gabbard
★★★★★
“
Highly recommended!”
-
Jim Rousey
★★★★★
“
I learned stuff about troubleshooting.”
-
Michael Pezzano
★★★★★
“
This course has made me way more efficient in diagnosing problems and also put a ton of money in my pockets. Spend the money now and I promise that you will get it back plus much more!”
-
Joseph Jones
★★★★★
“
My brain is fried.”
-
John Hedger
★★★★★
“
Not as many long videos, just as much good content. Couldn't ask for more.”
-
RyanH
★★★★★
“
Thank you for your time. I did not reach my goal of zero resets, but I'm glad I got a better understanding of the questions I got wrong. In the next year I will be reviewing some of the videos to improve daily.”
-
Adam Bebee
★★★★★
“
The advanced troubleshooting course is a great way to bring together all of the troubleshooting techniques learned in previous courses together.”
-
Scott Porazynski
★★★★★
“
Great practice using schematics”
-
Mark Kinney
★★★★★
“
This course has given me a lot more confidence when it comes to troubleshooting more complicated problems. Sharpening both my base electrical knowledge and my schematic analysis skills. I highly recommend this course, even if you've been doing this for a while.”
-
Damien Salimbeni
★★★★★
“
Awesome and challenging training!!!”
-
Faustino I Avila
★★★★★
“
great course i will using an going over this data until have mastered it fully”
-
rod
★★★★★
“
Good Content”
-
Charles Atencio
★★★★★
“
There is a treasure of knowledge in these courses. I highly recommended it.”
-
Huey P
★★★★★
“
Good course!”
-
Bryan Aven
★★★★★
“
This is a great course definitely learned a lot”
-
Vincent
★★★★★
“
The best course ever. Time to start fixing”
-
Fernie Corral
★★★★★
“
This course was a real test on my brain i loved it !”
-
Curtis lewis
★★★★★
“
Excellent course! Easy to follow. I highly recommend.”
-
Tony McMullin
★★★★★
“
excellent course i would recommend it to anyone starting out in appliance repair”
-
Raymond Ritchie
★★★★★
“
I have enjoyed this course so much !!!”
-
Thomas Galarza
★★★★★
“
There is an amazing amount of information in this course!”
-
Josh Drucker
★★★★★
“
Very challenging, but very informative.”
-
Ben Vermeulen
★★★★★
“
Very useful info for on the job duties.”
-
Mike Montgomery
★★★★★
“
it was very educational.”
-
Andrew Kwon
★★★★★
“
Congratulations team Samurai, you are doing a wonderful job of raising the standard in the Appliance repair industry. I am extremely happy i came across your school many years ago. I am really thankful for the knowledge i have acquired from your teaching. It has been a real game changer for me in many ways. I have recommended MST academy to many techs over the years and will continue to do so. In my humble opinion , this quality of training is not available anywhere else online. You are making real experts out of guesperts .”
-
Boven Charles
★★★★★
“
This one really helped nail down some concepts I was struggling with.”
-
Philip
★★★★★
“
Love all the courses here. love how the instructor explains everything. this is a big help if your a beginner or for even someone that has been in it for some time. i highly recommend this training hands down!!!!”
-
Jonathan
★★★★★
“
Another great course!”
-
Taylor Morrison
★★★★★
“
relevant and clear information that has improved my abilities as a technician greatly”
-
Brian Boucher
★★★★★
“
Very good course to sharpen troubleshooting skills.”
-
Bejamin Blume
★★★★★
“
What an excellent learning experience! I love the way you teach the course material. Great information that I really learned from. I feel prepared now to work on all appliances. Many thanks! I will see you at Appliantology.org.”
-
Steve McQueen
★★★★★
“
This organized and totally student involved course was excellent. Perfectly done lessons with meaty bits of information and a lot of side knowledge to satisfy any hungry appliantologist!!”
-
Fredric Nosul
★★★★★
“
It was great”
-
Ryan Niles
★★★★★
“
Outstanding! Just like all of the other courses I've completed. Thanks.”
-
David Lee
★★★★★
“
This course was exactly what I need to help me understand schematics and wiring diagrams better. Now I am more comfortable.”
-
Keithen Gaskins
★★★★☆
“
Was good, but I feel I need to learn more about schematics. Still lots of fuzzy areas about how the components on the schemata function at different points of the unit operation.”
-
Troy Schroder
★★★★★
“
This is an amazing course I have enjoyed it a lot.”
-
Matthew Tynan
★★★★★
“
Very detailed explanations on how to diagnose boards. Trick questions slipped in every now and then to make you think. Good Module.”
-
William Sprouse
★★★★★
“
Best Schematic overview and troubleshooting course for appliance repair. This approach to teaching forces you to utilize your brain and think through the situation to understand what the problem truly is and not just taking a wild guess and being a PCM. I learned an incredible amount of information by taking this course and other courses through the Master Samurai Tech training. I would recommend this training to anyone interested in becoming an appliance repair "technician".”
-
Steve
★★★★★
“
This is a great course. It takes you through real schematics, wiring diagrams, and tech manuals, and gives lots of great advice and insight into how one can more effectively troubleshoot.”
-
Nate Erickson
★★★★★
“
A very detail course in analyzing a schematic and tech sheet. Fully prepare you for the field”
-
Peter Persaud
★★★★★
“
great course learn alot of very important trouble shooting skills very informative”
-
Earles guillory
★★★★★
“
Most Excellent!!! Great course, really provides a more in depth understanding of control board operation and diagnostics.”
-
Robert Herrin
★★★★★
“
Great course, learned alot of valuable trouble shooting skills.”
-
Ryan Church
★★★★★
“
i am certified hvac tech before this course i thought i know every thing but i was wrong,course was awsom,now feeling confident. thanks very much Master Samurai”
-
sajjad malik
★★★★☆
“
This one was pretty hard”
-
Wesley Frederick
★★★★★
“
Good course for teaching trouble shooting skills for appliances. Well thought out and presented.”
-
Richard McCoy
★★★★★
“
Learned great skills in trouble shooting to help with diagnostic to use in the field.”
-
John Roberts
★★★★☆
“
Lots of practice with diagrams! Core is essential or you will struggle. If it’s been a while go back and refresh your schematic skills.”
-
Dan S
★★★★★
“
I felt coming into this course that i wouldn't learn that much as Appliance Repair is a trade and to me would be better learned with hands on experience. But i see now after completing this course that i learned many valuable tips, tricks and techniques that will certainly help me in my new career.”
-
Derian Dorman
★★★★★
“
Great learning material!”
-
BFray
★★★★★
“
Nice!”
-
Mike Cohen
★★★★★
“
extremely informative”
-
Mehmet Avci
★★★★★
“
The skills I learned in these courses without a doubt will make me a better technician. I now have a logical way of accessing the problem , analyze the schematic and tech sheet and, gettin er done.”
-
Davy Crochet
★★★★★
“
Another great course. Watch, listen and learn. You will be able to achieve your troubleshooting skills with confidence.”
-
Brian McGraw
★★★★★
“
It is getting harder guys! Thank you for all of the resources available for unit questions. These lessons have helped me already with repairing our "test subject" appliances.”
-
Jerromy Slocum
★★★★★
“
Great training!”
-
Angel Moreno
★★★★★
“
Great course! A definite must to help you get a better grasp of reading schematics and troubleshooting”
-
Chase Yoshikawa
★★★★★
“
great course. that last manual is daunting to go through online. i would love to have the book for that one in the field. but i do know that may not be possible all the time.”
-
damian goodson
★★★★★
“
This course is a must. Information contained throughout this unit is outstanding. The faculty are most helpful with any issues that arise. This course opens doors to many areas of understanding schematic and repair.”
-
Ronny C
★★★★★
“
Extremely challenging! I plan to ask for resets to get the most outta my studies.”
-
JP
★★★★★
“
Excellent course. The schematic exercises really make you think. The variety in manufacturing companies is very helpful. Some questions were difficult but they helped me to understand the schematics better.”
-
Larry Hodo
★★★★★
“
I enjoyed this course it made you think!”
-
Eugena Mebane
★★★★★
“
this one was very useful in many ways i took a lot away from this course”
-
Matthew Hudson
★★★★★
“
WOW this was another GREAT program”
-
Greg Jay
★★★★★
“
Great course!”
-
Marc Trought
★★★★★
“
As a 40+ year appliance repair professional, I was looking for a refresher course especially pertaining to the newer technology. While there wasn't much that was totally new to me, the course has helped me to approach troubleshooting in a more orderly fashion. I enjoyed the course and think it will be well worth the time and money invested.”
-
Stephen T.
★★★★★
“
got me thinkin again! hats off to you!”
-
Jacob Doerneman
★★★★★
“
Great course, tons and valuable information and really gets into troubleshooting and navigating the schematics.”
-
Edward gustafson
★★★★★
“
This is an awesome oppotunity for eather beginners and experience technician. Its really good to start this business or clarify the thing that you think you really know. i feel like I am more preparate to make better diagnosing in less time, leaving my customer more satisfy on the road. Thanks Master Samurai Tech.”
-
ENZO CHACIN
★★★★★
“
Another great course.”
-
Brian McGraw
★★★★☆
“
it a great website to learn schematics but the video are very tedious and long sometimes”
-
dylan
★★★★★
“
Excellent information. This course got my my mind back in troubleshooting mode, and I learned some very helpful information about open neutral wires.”
-
Duane Perkins
★★★★★
“
It was really incredible, My mine wanted to melt. But in the i learned a whole bunch . Thank you very much.”
-
Edward Wilson
★★★★★
“
Awesome”
-
Ali Zangeneh
★★★★★
“
Very helpful and educational.”
-
Jon Myres
★★★★★
“
After completing this course, I feel more confident about reading schematics.”
-
Don
★★★★★
“
I'm glad I took the course I learned so much I didn't know.”
-
Lamar
★★★★★
“
IT WAS VERY GOOD AND I AM VERY HAPPY I TOOK THIS COURSE.”
-
Ted Manales
★★★★★
“
great criteria”
-
Chad Shomate
★★★★★
“
Great course, both informative and challenging!”
-
Zachary Hatch
★★★★★
“
This was a very challenging course, I would defiantly recommend this to any technician that has already completed the fundamentals of appliance repair”
-
Andrew Anderson
★★★★★
“
I am better at reading schematics than I thought and it is all due to this course”
-
chase selleck
★★★★★
“
great course just hard to do without the schematic. RESPONSE from Team Samurai: the schematics are included with the lessons. You just need to download them and open them up in a new tab.”
-
robert stites
★★★★★
“
Great course. Really drives home all the concepts I've spent time on in a way that seems relevant to my daily routine.”
-
Scotty Ellis
★★★★★
“
Advance Troubleshooting is a whole new ball game! Not only do you reinforce what you learned in fundamentals, but you dive deep into advanced troubleshooting such as loading down, open neutrals, and reading more advanced timing charts etc. Incredible course for anyone who has a basic understanding of electricity, and who has taken the fundamentals course here at MST. I would not recommend taking this course if you have not taken the fundamentals course. Incredible!”
-
Peter Alward
★★★★★
“
Glad I took this course.”
-
Bryan K
★★★★★
“
very great information”
-
Taylor
★★★★★
“
Another great course”
-
Michael Obas
★★★★☆
“
Good challenging course.”
-
Tobias Terry
★★★★★
“
It is one thing to be a Guru Master Samurai Tech such as Mr. Brown. It is amazing quality when a Guru as talented to share that vast treasure of knowledge to the rest of the world in such a masterful well thought out inspirational guided path, from beginning to end. Thank you and Godbless you and your family. Thank you, Scott Williams”
-
Scott Williams
★★★★★
“
Overall I was quite satisfied with the course material. The presentation, and presenter were worth the investment. Scott, excellent instruction.”
-
Russell
★★★★★
“
Very thorough troubleshooting training. I learned more in this course than I had in two years of HVAC/R training in my local community college.”
-
Glenn
★★★★★
“
Lots of relevant information.”
-
Deb Rustebakke
★★★★★
“
Troubleshooting skills improved a lot with core, and this course took me a step beyond. Thanks team Samurai!”
-
DavidG
★★★★★
“
Great coarse. Enjoyed having my brain stretched.”
-
Lauren Stauffer
★★★★★
“
Great course.”
-
Joe Bischoff
★★★★★
“
There was a lot of very good and critical information that will be helpful in troubleshooting. I liked the schematic exercises a lot.”
-
Joshua Velazquez
★★★★★
“
Great course. I appreciate all the help.”
-
Lorenzo Dejesus
★★★★★
“
I just thank God we have 2 chances at tests. I did fine on all the first time till I got to double range qiiz.i felt rushed for time.only scored 62%. but then I took my time and easily found the rest of the ans.lol.great course though.”
-
john beaton
★★★★☆
“
This one makes you really think. Good job”
-
Tyler grohs
★★★★★
“
Clarified how to definitively diagnose using schematics and will definitely help in those curve ball situations. I also see this course as a valuable resource even after completing.”
-
Grant
★★★★★
“
Enjoyed this course!! This was tough. Even for the seasoned technician. This is well constructed and I advise anyone wanting knowledge in appliance repair and troubleshooting to take the entire course!! Thank you Samurai Team!!!”
-
DKauai
★★★☆☆
“
good course. learned alot of things i was fuzzy on reading diagrams.”
-
andy
★★★★★
“
Another information goldmine ..Look forward to using the mental tools I've gained”
-
Michael Sanford
★★★★★
“
Each MST course closing some gaps in appliance troubleshooting! Thank you very much!!!”
-
juster
★★★★★
“
The “Advanced Troubleshooting Course” is powerhouse of troubleshooting knowledge. It reenforces the fundamentals plus it gives you lots of valuable insights and practice with complex in-depth troubleshooting situations. I learned a great deal in this course. By applying these principles, I’m already saving time and completing more repairs on my first attempt. I highly recommend this course, it was awesome. Thank you. Abe Almonte (AKA: honeybadger)”
-
Abe Almonte (A.K.A. honeybadger)
★★★★★
“
I believe all the employees of all the different tech lines should be required to take all these courses and must be certified from MST”
-
Scott Almy
★★★★★
“
very thorough”
-
Tom Santiago
★★★★★
“
very informative”
-
Jess Preston
★★★★☆
“
As always great material. example videos do wonders.”
-
Tyler Duckworth
★★★★★
“
Great course to help me understand advanced troubleshooting concepts on appliances.”
-
Matthew Henning
★★★★★
“
I have now completed and thoroughly enjoyed each of the Samuria courses. Now it's time to review the material and continue to apply it in the field.”
-
CARL MCCARTY
★★★★★
“
I highly recommend this appliance acadamy i have learnt alot from Mr&Mrs samurai”
-
jesse maina
★★★★★
“
Great course! I was uncertain what to expect at first but decided to go ahead and take the step and take the course. I am so happy I did. Learned a lot and will continue to learn as I go back through the course again and then again. As I know there is more to gain from revisiting the lessons.”
-
Derrell W
★★★★★
“
Great course”
-
Mike
★★★★★
“
Most excellent course, very in-depth. Really enjoyed the schematic exercises at the end of the course.”
-
Garrett
★★★★★
“
Was a great section!”
-
Chad Powell
★★★★★
“
challenging course liked it alot”
-
mark casteel
★★★★★
“
Came away with a full cup of knowledge on these courses!”
-
Michael Summerson